Factors Affecting the Filling Accuracy of Filling Machines
When manufacturers use the automatic bottling machine to bottle liquid, the filling error will occur. How does this error come from?
With rich experience, Topper Bottling Machines Co., Ltd. has a deep understanding of the automatic filling machine. And it will describe some factors that affect the filling accuracy of filling machines.
1. Temperature
Oil, water, liquid milk, etc. have a certain amount of density at normal temperature, and the density will change with the change of temperature, so the quality of those liquids with the same volume will not be the same.
However, this difference is within the allowable error, and the possible error range should be indicated on the exterior package.
2. The flowmeter
In the filling control system, the flow detection is generally performed by various flowmeters. The intrinsic error of flowmeters is obtained under standard operating conditions. In the actual use, as site operating conditions often deviate from standard operating ones, the extra error will inevitably occur. Therefore, the field use error of the flowmeter should be the combination of its intrinsic error and extra error.
Choose a flowmeter with small errors and high precision, and try to avoid errors caused by instruments.
3. The filling system
Nowadays, bottling machines are developing to the direction of intelligence, and the whole filling process is usually controlled by the filling system. To a great extent, the filling speed and accuracy also depend on the analysis and operation of the filling system.
